Here are the Dos and Don’ts of using our game-changing Crep Protect FoamX.
Dos:
Apply A Generous Amount Of Foam To The Sneaker
To get your prized possessions looking their best, we recommend applying a generous amount of foam to your sneaker, covering its entirety, this way no dirt and grime are left behind. As a general rule of thumb, our specially curated foam cleans up to 5 pairs of sneakers, therefore you may need to re-up sooner rather than later.
If that’s the case then buy some extra FoamX in the meantime
Use A Damp Microfibre Towel To Wipe Away Any Excess Dirt And Foam
Wiping away any dirt and foam on the sneakers should be always done with a damp microfibre cloth because the microfibre cloth contains microscopic in-towel fibres that gently lifts extra dirt and stains that lie on the surface of your sneaker during the foaming process. Plus, a microfibre towel is super absorbent and ultra-soft on those delicate materials.
Shop our Microfibre Towel
Test The Product On Soft-Colored Suede Before Use
Although the Crep Foam X works wonders on all sneakers and material types, we recommend being extra gentle on those colored suede sneakers as they are prone to colour bleeding. Before use, test the Crep Foam X in a small, inconspicuous area of your suede sneakers - then you’ll know for sure whether you’ve saved 150 bucks!
Don’ts:
Add Water To The FoamX Solution
Unlike our 100ml Cure solution, the Foam X is a highly concentrated cleaning foam, therefore no water is needed to dilute the cleaning process. Just foam your sneakers up, wait 5 minutes wipe off and voilà - fresh sneakers just like how you unboxed them.
Leave The FoamX On Longer Than 5 minutes
For this quick-action cleaning foam, you mustn’t leave it on for no longer than 5 minutes as that is all that is needed to fight the existing dirt and stains on your sneakers. Of course, if the dirt persists, you can wipe off the foam and reapply as many times as you need to achieve to desired sneaker cleaning results.
Wear Sneakers Straight After Use
Similar to many of our cleaning products, we advise you to leave your sneakers to dry for at least 12 hours after applying Foam X. You can leave your sneakers to air dry in a well-ventilated room or outside in the sunlight. And remember - once your sneaker is dry - apply a couple of layers of our Crep Protect Spray to give your sneakers the longevity that they need!
Your Ultimate Guide to Crep Protect Foam X is ready to view
2 thoughts on “The Dos and Don’ts of Using Crep Protect Foam X”
Hygreev
i used yours crep foam C cleaner on the sole of me air force ones. you know the small stars on the front and back of the air force one, i used a small amount of your foam cleaner on it since there was some dirt stuck in between the small stars, and i used a medium brush and cleaned it like usual, but after i was completely horrified as i saw that a patch of the small stars have been completely eroded away and instead of a uniform area of the stars there is now a small patch of just thr rubber sole with none of the smal stars that are meant to be there. why on earth has this happened?
alvin garcia
the creo foam x i just bought doesn’t foam up and just comes out a liquid.